|
Hard
Freeze System 5 Features:
|
 |
12 Volt Pump with Photovoltaic Panel |
 |
Light weight, easy to install collectors with all
copper high performance absorbers |
 |
Complete "Easy Mount" rail system |
 |
Digital Twin Temperature Readout with sensors, tape,
& a spare set of batteries |
 |
All solar Loop Parts and Fittings Including
pre-soldered assemblies |
 |
50' roll of soft copper tubing with compression unions
and Ells |
 |
FREE 36' of 1/2" wall high temperature
insulation |
 |
Tempering Valve (3/4" C x C x C) also no solder
Tempering Valve Options |
 |
No soldering required for the entire solar loop
|
 |
High Efficiency Rheem | Rudd Heat Exchanger tank with
easy connections |
 |
"Quick Connect" to bottom of tank or optional Top
Connects available |
 |
FREE Option: Choice of "Stacked" or
"Side by Side" collector layouts |
 |
Choice of 2 Standard and 24 optional Collector Trim
Colors |
 |
A choice of options to make the system just right for
you |
|
Hard
Freeze System 5 Parts List:
|
 |
10 square foot solar thermal collector(s), 20" wide x
6' long |
 |
Rail flush mounting kit with lags |
 |
System dependant 12 Volt Laing circulation pump
|
 |
5, 10, or 20 watt PV panel with 25' of wire |
 |
50' roll of 1/2" OD soft copper |
 |
Compression unions, lag screws, washers, tec screws
|
 |
36' of 1/2" wall high temp insulation |
 |
"Quick Connect" Kit for existing or added water heater
with shutt off and drain valves |
 |
Floating ball check valve ("Bottom Connect" is
standard, "Top Connect" (TC04) is available at a $195 extra charge)
|
 |
Solar Loop Pressure Relief Valve (PRV) with splash
guard |
 |
Air vent with pre-soldered assembly |
 |
Temperature guages |
 |
Tempering valve (20s/f and above) |
 |
Special OG-300 labeling |
 |
Installation & Owner's Manuals |
|
NOT
Supplied: |
 |
Storage Tank (except with TC80FL option) |
 |
Water side plumbing. |