Fans And Blowers

Small Volume Blower #09100

A reliable shaded-pole centrifugal blower offering maximum efficiency, yet quite air delivery for use on solar collector modules or small permanent installations (30-100 square feet) . Provides 265 CFM in free air, down to 135 CFM at 1/2" static pressure. Mounting flange measures 5" high x 5-1/2" wide. 1/20 HP motor with start-up amperage of 2.8.

$ 129.00

Quantity:

Medium Volume Blower #09110

This blower is driven by a dependable, heavy duty Dayton 1/10 HP shaded-pole motor, designed to operate with a minimum of noise. It provides 525 CFM in free air down to 387 CFM at 1/2" static pressure. May be used on 100-300 square foot collector systems. Start-up amps 6.5.

$ 229.00

Quantity:

Medium Large Volume Blower #09120

This blower is driven by a dependable, heavy duty, shaded-pole motor designed to operate with a minimum of noise. Wheel is heavy-duty, balanced and direct driven. Provides 980 CFM in free air, down to 730 CFM at 1/2" static pressure. Can be used on collector systems measuring 300-500 square feet. 1/5 HP motor with start-up amperage of 9.8. Use mounting support (#09130) for easy installation.

$ 299.00

Quantity:

Mounting Bracket #09130

Can be used with blower #09120 listed above. Facilitates base-mounting blower from bottom, upward, and overshot discharge. Sturdy steel, gray finish. 12-3/4" long.

$ 17.95

Quantity:

Shutter Mounted Exhaust Fans For Greenhouse Ventilation

Easy to install, complete, efficient exhaust fan units. Guarded fan is mounted on automatic shutter. Quickly installed as a unit in wall opening 1" larger than diameter of fan blade. Fan-motor is mounted on heavy-duty wire guard and attached to automatic shutter, 115v, prelubricated motor.

Stock Number

Price USD

Blade Dia.

CFM Air Delivery

Motor HP

Full Load Amps

Square Opening Required

09180

$ 168.00

Quantity:

7"

135

1/30

1.0

8-1/2"

09181

$ 185.00

Quantity:

10"

520

1/30

1.0

10-1/2"

09182

$206.00

Quantity:

12"

650

1/30

1.0

13"

09183

$ 275.00

Quantity:

16"

870

1/20

1.9

17"

09184

$ 359.00

Quantity:

18"

1625

1/15

2.8

19"

Return Vents

Install on opposite end of greenhouse to supply return air for above exhaust fans. Can be used with shutter motor listed below.

Frame Opening Required Stock Number Price USD

11" x 11"

09170

$ 44.90

Quantity:

13" x 13"

09171

$ 49.00

Quantity:

17" x 17"

09172

$ 65.00

Quantity:

19" x 19"

09173

$ 72.95

Quantity:

Shutter Motor For Positive Damper Control

Designed for use with the shutters listed above. When properly wired unit automatically opens and closes when fan or blower is activated. Shutter motor is equipped with single phase motor, motor plate, linkage, and mounting hardware.

Shutter Motor_______#09160_______$ 119.00
Quantity:
Line Voltage Wall Thermostat #13320

An Attractive interior thermostat which can operate in either heating or air conditioning mode. Good for use in greenhouse to blow heated air in house or vent in summer. Setting is adjustable from 60 degrees to 90 degrees F, with 4 degree fixed differential. Will handle up to 1/4 HP at 115V.

$ 23.95

Quantity:

 
Goldline GL-30 Differential Control #16760

The GL-30 is the newest generation of solar differential controllers. It is field adjustable, accepts 115 VAC or 220 VAC.

Key Features

  • Adjustable "on" differential (8 to +25 degrees F)
  • Adjustable high limit shut-off (105 to 212 degrees F or of
    is standard equipment
  • Provides 24 VAC power
  • UL Listed
  • E.S.D., E.M.I., and R.F.I. protected
  • Utilizes 10K ohm sensors
  • For all Closed Loop, Open Loop, Drain Back, Drain Down, and Air systems.

Download the GL-30 Manual

$114.00

Quantity:

 
SB Sensor #08550

10K sensor for use with Goldline GL-30 control above. Flexible copper for bolt on or strap on installation.

$ 15.00

Quantity:

 

[Home] [Aquaculture Products] [Order] [Photo Gallery] [Customers]

Copyright © 2007 Solar Components Corp.
121 Valley Street
Manchester, NH 03103
Phone: 603-668-8186
Sun-Lite® is a registered trademark
of the Kalwall Corp.