SAVE MONEY BY RECYCLING THE HEAT YOU'VE ALREADY PAID FOR!

WHAT IS AN AIR DESTRATIFIER? Air stratification is the single biggest waste of heating energy in buildings and homes today. Our standard model pictured above is essentially a high-tech recirculating fan system that moves the hot air from your ceiling down to the work area where it is needed. The result is lower energy bills and a more comfortable environment.

1	2	3
No Fan - A Big Energy Waster!Stratified air is a natural condition normally found  in buildings. Heat rises up to and through the ceiling while the cold air remains on the floor.	Conventional Ceiling Fan Conventional paddle fans only partially destratify air and usually produce uncomfortable drafts. They are generally more expensive and have a higher cost of operation.	StratoJet The Stratojet Heat Recycler efficiently balances the air in residential and commercial applications for more even floor to ceiling temperatures. This reduces energy use and cost, eliminates hot/cold spots, and increases your personal comfort.

StratoJet Model 500 

#09300 StratoJet 500 - $118.95 Quantity:

The StratoJet 500 unit is 12 inches high, 10.6 inches in diameter, and weighs 3.5-pounds. Model 500 hangs from a ceiling using a common ceiling hook. The power cord plugs into a standard wall or ceiling outlet. Airflow is approximately 80 cfm (nominal) that enables Model 500 to effectively destratify approximately 500 square feet of floor space and accommodate ceiling heights up to 20 feet. The unit comes with a 20' power cord. The thermal impedance protected destratification fan uses less than 20-watts of power, draws 0.3 amps, and requires standard 120V 60Hz.

StratoJet Model 750 

#09310 StratoJet 750 - $168.00 Quantity:

Model 750 is the exact same physical size as Model 500. However, it uses a more powerful destratification fan capable of destratifying up to 750 square feet of floor space with ceilings up to 30 feet. The 0.6 amp motor uses approximately 30-watts. Model 750 is used in light commercial, light industrial, and agriculture facilities and comes with a 3-foot industrial 3-prong power cord. Also available in a hardwire version with a standard junction box mounted at the top of the hood instead of the power cord.

StratoJet Model 1000 

StratoJet Model 750-InCeiling (750-IC) 

StratoJet Model 1000 In-Ceiling (1000-IC) 

#09340 StratoJet 1000-IC - $258.95 Quantity:

StratoJet Model 1000-IC is identical in physical size and color to Model 750-IC. It uses a 0.9 amp, 40-watt impedance protected destratification fan that enables destratification of up to 1000 square feet of floor area and accommodates ceilings up to 40 feet. Power requirements are 120V, 60Hz. The standard junction box mounted on the top of the hood enables easy electrical connection.

StratoJet Model 1000-D is the same in physical characteristics as Model 1000. However, it comes with flexible, variable length ducting attached to the nozzle. This lightweight flexduct enables StratoJet 1000-D to discharge air at the floor level. Model 1000-D is popular in facilities where the standard column of air created by Model 1000 may be interfered with by horizontal such factors as wind, blowers, machinery, or facility operations. There may be instances where it is necessary or desirable to cause the Strato air column to strike the smallest floor space as possible. For example, greenhouse with unusually high ceilings may prefer Model 1000-D to standard Model 1000 to prevent any airflow from striking soil or foliage

#09350 StratoJet 1000-D - $198.95 Free Shipping in Continental US! Quantity:

The flex ducting is collapsible and will not be damaged if bumped. Length is made-to-order.     Read customer quotes and testimonials.

OVERSTOCKED SPECIALS WHILE SUPPLIES LAST!!

10' Stratojet 

#09470 - 10' StratoJet - $19.95 Quantity:

The 10' StratoJet unit is designed for ceiling heights up to 10 ft. and room sizes up to 200 sq. ft. It has a 10' electrical supply cord. Requires 10 watts and comes in the color beige (can be painted). Dimensions: 6" x 8". Weight: 2.4 lbs. U.L.listed.

Strato In-Wall 

This unit is built into the stud cavity of residential and commercial spaces for retrofitting or during new construction and remodeling.
The Strato In-Wall draws warm air into a grate near the ceiling, blows it down between the studs in an interior partition and back out through a second grate. It can return the warm air to the same room or transfer it to an adjoining room. A speed controller lets you select fan speed for optimum comfort. Designed for ceiling heights up to 20 ft. and room sizes up to 200 sq. ft. Require a maximum of 18.5 watts and are U.L. listed

#09460 - Stratojet In-Wall - $19.95

20'and 30' Stratotherm Industrial Models

Stratotherm is the industrial model of Stratojet. Ceilings of industrial buildings are a hotbed of heat stratification. Warm air stagnates in a layer against the ceiling, resulting in large temperature differences between floor and ceiling. The more ceiling temperatures are reduced by Stratotherm, the greater the savings. These units should be installed close to the ceiling, usually within 18". Warm air is drawn in and forced down to floor level at a designed volume of 120 CFM. One Stratotherm will de-stratify 2000 square feet of floor space. Metallic gray vinyl ducting hangs from unit to floor and is lightweight, durable, and easily adjusted to fit any ceiling height. Available in standard lengths of 20' and 30'.

#09500 - 20' Stratotherm - $26.95

#09510 - 30' Stratotherm - $27.95