STRATOJET
Manufactured by Rusth Industries in the 1980's
(Never used. In original cartons)
While Supplies Last!

IT MOVES THE HEAT FROM THE CEILING TO THE FLOOR

EQUAL ROOM TEMPERATURES Stratojet delivers a continuous, low velocity stream of warm ceiling air to the floor. Mother Nature does the rest. A natural convection current is set up, and in minutes, floor-to-ceiling temperature differentials are brought to within a few degrees. It happens gently, quitely, without gusts of air from ceiling fans or other turbulation devices.

THE PROBLEM OF HEAT STRATIFICATION Heat stratification is a problem in almost all living spaces. Warmer above and cooler below. Heat doesn't stay at floor level; it rises rapidly to the ceiling and out of the room. This natural phenomenon accounts for millions of dollars each year in wasted oil, gas and electricity used for home heating. Fortunately, there is a simple and inexpensive solution: Stratojet!

10' Stratojet 

#09470 - 10' StratoJet - $19.95 Quantity:

The 10' StratoJet unit is designed for ceiling heights up to 10 ft. and room sizes up to 200 sq. ft. It has a 10' electrical supply cord. Requires 10 watts and comes in the color beige (can be painted). Dimensions: 6" x 8". Weight: 2.4 lbs. U.L.listed.

Strato In-Wall 

This unit is built into the stud cavity of residential and commercial spaces for retrofitting or during new construction and remodeling.
The Strato In-Wall draws warm air into a grate near the ceiling, blows it down between the studs in an interior partition and back out through a second grate. It can return the warm air to the same room or transfer it to an adjoining room. A speed controller lets you select fan speed for optimum comfort. Designed for ceiling heights up to 20 ft. and room sizes up to 200 sq. ft. Require a maximum of 18.5 watts and are U.L. listed

#09460 - Stratojet In-Wall - $19.95

20' Stratotherm Industrial Model

Stratotherm is the industrial model of Stratojet. Ceilings of industrial buildings are a hotbed of heat stratification. Warm air stagnates in a layer against the ceiling, resulting in large temperature differences between floor and ceiling. The more ceiling temperatures are reduced by Stratotherm, the greater the savings. This unit should be installed close to the ceiling, usually within 18". Warm air is drawn in and forced down to floor level at a designed volume of 120 CFM. One Stratotherm will de-stratify 2000 square feet of floor space. A 20' long Metallic gray vinyl ducting hangs from unit to floor and is lightweight, durable, and easily adjusted to fit any ceiling height. Limited Supply!

#09500 - 20' Stratotherm - $26.95